About us - PM Group
PM Group invites you to a breakfast briefing focused on process safety challenges for Industry 4.0. on Tuesday 3rd December in Cork.
At the event Keynote speaker, Pat Conneely (Health & Safety Authority - HSA), will provide the regulators view of major accident hazards on both COMAH and Non-COMAH sites. PM Group process safety specialists will discuss digital technology, human factors in Industry 4.0 and toxic/asphyxiant gases.
This free event will benefit operational and engineering managers, EHS and process safety professionals, newcomers to EHS and anyone interested in process safety and risk management at all levels. There will also be opportunities for networking with industry practitioners.
Tuesday 3rd December 2019, 8:00 to 11:00 am.
Venue: Maple Suite, Rochestown Park Hotel, Cork.
Kindly supported by IChemE All Ireland Members Group and Engineers Ireland, this event counts for two hours of continuing professional development.
|8.00||Registration, Breakfast, Tea & Coffee|
|8.30||Welcome and Introduction, Brian Tiernan, EHS Department Manager, PM Group|
|8.40||Can digital technology improve process safety? Pat Swords, PM Group|
|9.00||The role of human factors in Industry 4.0 process safety management, Brenda Madden, PM Group|
|9.20||Major accident hazards on both COMAH and non-COMAH sites Pat Conneely, Health & Safety Authority|
|9.50||A look at the lesser known toxic and asphyxiant gases, Sinead Keohane, PM Group|
|10.10||Q&A Closing Remarks|
|10.30||Networking, Tea & Coffee|
Pat Conneely, Head of COMAH, Chemical Production and Storage Unit, Health and Safety Authority
Pat Conneely heads up the COMAH, Chemical Production and Storage Unit of the Health and Safety Authority (HSA). He has been an inspector with the Authority since 1997, having previously occupied research and production roles within the pharma-chem industry. Pat steered the implementation of the COMAH Regulations 2015, the Guidance on Safety Report Assessment and the inspection approach under Seveso III. He was one of the authors of the HSA's Policy & Approach to Land-use Planning document and the recent Guidance on Significant Modifications.
Pat Swords, Principal Process & EHS Consultant, PM Group
Pat is a chartered chemical engineer with over 35 years of experience in the chemical industry. He is a Fellow with the Institution of Chemical Engineers, FIChemE and a registered Professional Process Safety Engineer. Pat’s experience includes front-end engineering and detailed engineering design of a wide range of industrial facilities. Pat is an experienced HAZOP chair and has completed numerous ATEX (Explosive Atmospheres) compliance projects for both vapour and dust hazards.
Brenda Madden, Principal Process Safety Engineer, PM Group
Brenda is a chartered chemical engineer with some 30 years of specialist experience in Process Design and Process Safety within Pharmaceutical, Chemical, and Nuclear industries. Brenda is a registered Professional Process Safety Engineer with IChemE. Recent experience includes Bio Pharma Process/Mechanical Design, Pressure Relief Systems Sizing, ATEX/HAC Consultancy, COMAH Safety Reports and HAZOP/LOPA Facilitator.
Sinead Keohane, Lead Process Safety Consultant, PM Group
Sinead has over 18 years of Safety, Health and Environmental experience in Process Safety Consultancy and in the Pharmaceutical and Beverage industries with a BSc (Hons) Chemical and Process Engineering and an MSc (Eng) in Process Safety & Loss Prevention. Recent experience includes the management of the Process Safety Programme for 2 large pharma design projects,PHA, LOPA, Consequence Modelling using PHAST, HAC and Nitrogen Asphyxiation Risk Assessments. Sinead is also part of the HSA Land Use Planning expert group.
For enquiries, contact Brian Tiernan. T: +353 21 4358922